Trusted Appliance Repair in Mesa
Call us: 480-862-6435
Bishop and Son is your Trusted Home Appliance Repair Company. We have built our reputation on our friendly and caring manner.
We are trusted because we do the extra steps on every job to determine the cause and effect of machine breakdowns. We will not stop at simply removing parts and replacing them. We investigate to Know why a part has failed and how this affects other parts. When we advise you about the condition of your appliance it eliminates surprises and prepares you in making good decisions.
Rick Bishop Diagnosing a Refrigerator
{ 11 comments… read them below or add one }
My maytag is not operating properly on the spin cycle. Do you have an estimate to repair?
Michael,
Your information on the Maytag is limited. Can you provide me with the approximate age, model number and any additional information about the performance or lack there of the machine? Does it drain the water? Is there a noise associated with the problem? What is the improper operation in spin?
I have a question. We have a 4 and 1/2 year old GE washing machine that has never given us a problem. Tonight it made a loud screeching sound about 15 minutes into a wash cycle and there was water flooding out of the bottom of the washer all over the laundry room. The connections at the wall were dry and also at the washer, it seemed to be coming out of the bottom of the washer. Would this be an issue you could check into? GE Top loading washing Model # WBSR3140G1WW and the Serial # is RM 166261G.
Thank you so much,
Stacy
Stacy,
The water could be coming from the main bearing or the water pump. The screeching sounds indicates mechanical cause or affect from the water. This is the kind of issue which cannot be diagnosed remotely. A quick look at the machine will be required to determine the cause and extent of any damage.
Hello,
Do you repair small appliances — Barijta expresso machine and a front drip coffee maker?
Thanks
Patti
Hello Patti,
Yes we do repair small appliances at our shop. Espresso machines are another strong point for me. You can drop your machine off at our office. We require a non refundable deposit of $45.00. The deposit is applied to the repair. It may take a few days before I call you with my diagnosis and quote for repair, as I am very active in the field too.
Our prices are fair and our work is guaranteed.
Please give us a call to arrange for drop off; 480-862-6435
Cate will be happy to help you!
need help.. Whirlpool model# LLR9245DQO Water will not shut off after filling to correct water level and move to washing cycle. I have already replaced the Water inlet Valve 285805, & Water Level switch 3356465. looks like possibly the main switch but I could not order looks like discontinued.. Can you help
Melanie, check the drain hose in the wall. If it is inserted too far into the standpipe water will flow out as it is filling and the wls will never be satisfied. The best approach is to pull the hose out then reinsert only around six inches. Then tie the drain hose to at least one of the water hoses with zip ties or whatever you have available that will hold it from being pushed out of the standpipe. This should solve your problem. If not you can open the control panel by lifting it over the back of the machine, then very carefully check the operation of the switch by blowing into the switch. The safest way is to press on a temporary hose to the switch then blow through the hose. You should hear an audible click and water will shut off. If this works and problem still exists, then replace the rubber hose to the switch, as it probably has a pin hole in it.
I hope this helps.
Remember appliances are machines. They require high voltage to function. There are risks involved in servicing them yourself. Only those with electrical knowledge and applied safety practices should consider working on their own machine.
Should you require any additional help, please call me at 480-862-6435.
Great service!! My washing machine didn’t spin and drain water last night, so I called them today and the owner, Rick came the same day. The lady who spoke to me on the phone was super nice and so sweet. My name is not an American name so some people have a hard time to get it and become rude sometime, but she was so patient and sweet. She told me that the owner would be there from 3pm to 5pm. She called me about 4pm to let me know that Rick was on his way. He was very polite and professional. I explained to him the problem and he found the problem right away and fixed it! I like to learn things so I was asking him questions and he answered them nicely
while working on my washer.
I saw family oriented, people oriented and giving service oriented business in them. I definitely call them again if I need them :)
THANK YOU!!
I couldn’t post the review on the site Rick asked me to go to, so I wanted to send here.
My 14 month old maytag washer stopped working. We never liked this washer to begin with, but I would hate to throw it away. I am just afraid to have a service man come out for $80 only to tell me it needs a $200 fix. In that case I would just rather buy a new washer.
What is your service charge?
Can I bring it in to reduce the look at charge?
Thanks for any help, James
Hello James,
I do understand your dilemna. 14 months is not old for any machine.
Can you tell me what it is, or isn’t doing? Perhaps I can help to diagnose the issue and then better advise you.
Our service charge is called a diagnostic fee. Our fee is $69.00 and is really only intended to keep those who would from having us driving around all day looking at their machines for free. Our diagnostic fee is waived with the repair.
I would be happy to advise you on your Maytag. I just need to know the problem and the model #.